Direct Answer

To clean a dab rig, gather 91% isopropyl alcohol, coarse salt, cotton swabs, and warm water. Disassemble the rig, clean the banger on its own with a swab and alcohol, then pour alcohol and salt into the glass, shake for 1-2 minutes, rinse with warm water, and let dry before reassembly.

Prerequisites

  • 91% or higher isopropyl alcohol
  • Coarse salt (Epsom or sea salt)
  • Cotton swabs or pipe cleaners
  • Warm water
  • Paper towels or lint-free cloth
  • Gloves (optional)

Step-by-Step Cleaning Instructions

  1. Empty the water from the rig and disassemble the banger from the glass.
  2. Clean the banger: Dip a cotton swab in isopropyl alcohol and wipe the inside of the bucket. For heavy residue, let the banger soak in alcohol for 10 minutes, then scrub with a swab.
  3. Clean the glass: Pour 1-2 tablespoons of coarse salt into the rig's main chamber. Add enough isopropyl alcohol to cover the salt and reach all interior surfaces.
  4. Cover openings with your hands or stoppers. Shake the rig for 1-2 minutes. The salt acts as an abrasive to remove resin.
  5. For stubborn spots, let the mixture sit for 15-30 minutes, then shake again.
  6. Rinse the rig with warm water until no alcohol smell remains. Rinse the banger after the rig.
  7. Let all parts air-dry on a paper towel. Reassemble when dry.

How to Clean a Banger

The banger collects dark residue after dabbing. Clean it after each use with a dry swab to prevent buildup. For deep cleaning, use the alcohol soak method above. Avoid using abrasive tools on quartz bangers to prevent scratches.

Water and Reclaim

Change the water in your rig daily for best flavor. Reclaim (the oily residue) can be collected from the glass or banger, but it is low quality. Many users discard reclaim instead of reusing it.

How Often to Clean

Clean the banger after every few dabs. Clean the glass rig at least once a week with alcohol and salt. If you use the rig a lot, clean it every 2-3 days.

Tips for Keeping Your Rig Clean

  • Use a carb cap to reduce splash.
  • Do not let water sit in the rig for long periods.
  • Wipe the banger with a dry swab while it is still warm.
  • Store the rig in a dust-free place.

Avoid using boiling water, as it can crack the glass. Do not use abrasive scrubbers on quartz bangers. Store the rig in a case when not in use to prevent dust and damage.